HONGYANG GROUP Georgia Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Georgia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U612 Flexible Pipe

fuel-dispenser

U612 Flexible Pipe

Materials:

Features:

Working Pressure<0.6MPa

Diameter:1.5"

Materials:l

Body: SUS304

Package:

Product ID Weight Dimension

U612-A 37kg/case of200

23×23× 34cm/case of 200

U612-B 37kg/case of200

23×23× 34cm/case of 200

products links

links

technical archives

    As past over long service time, parts abrasion universally or cylinder severely damaged, a new measurement transducer should be installed to replace old one. As find exterior leakage, firstly inspect the bolts corresponding to leak section. Tightly screw loose bolts, if leakage is continued, disconnect and inspect the seal ring and gasket relative section. Substitute aging or damaged parts and reassemble. Apart from the above reasons of extensive colloid and surface abrasion, these trouble also cause abnormal operation of measurement transducer, such as position pin fall down from piston or deformation, small axis lost on upper and lower connecting rod, loose bolt between piston and connecting rod. The solution is that disassembling measurement transducer, replace damaged or unqualified components and reassemble. The products made in normal factory seldom appear these troubles. Since measurement transducer is core component of fuel dispenser, elaborate machining, disconnection and reassembly should be as careful as possible. All elements should be cleaned before reassembly, excluding water into inner. Bolts are tightened even and appropriately. Soft-piston measurement transducer As these merits --- small in size, light weight, beautiful appearance, high accuracy, piston exchangeable--- soft-piston measurement transducer is widely adapted in domestic fuel dispenser market. It generally involves two structures: four-piston structure and double-piston structure. The latter model is selected universally. Therefore, this article will in fuel dispenser troduce the structure, working principal and maintenance of four- piston measurement transducer. Structure Diagram 2-20 and Diagram 2-21 show the cutaway view and exploded drawing of four-piston measurement transducer that fuel dispenser is widely employed. The transducer mainly consists of sealed cover, upper subassembly fuel dispenser , export axis, frame subassembly, piston subassembly, connecting rod and top cover, clearly presenting in Diagram 2-20 and Diagram 2-21. Diagram 2-20: Cutaway view

technical specification

    LOSED.   This action will involve dealing with the proprietary FP being CLOSED but having   its nozzle removed.   Action: The FP receives a Close_FP command.   Action : The FP state change is send as an unsolicited data array   FP_Status_Message .  FP31_2.23 IFSF - STANDARD FORECOURT PROTOCOL March 2006   DISPENSER APPLICATION   Page: 44   MAJOR-ERROR If a major error event occurs the FP moves into the INOPERATIVE state.   If a zero transaction is required (dictated by the contents of the data element   ZeroTR_Mode ) the transaction with a zero value must be stored in the transaction   buffer.   PCD Comment:   When the PCD detects a major error with the proprietary FP or with itself it must   change the IFSF FP status to INOPERATIVE.   Action : The FP sends the unsolicited data FP_Error_Type_Mes .   The FP state change is send as an unsolicited data array   FP_Status_Message .   MINOR-ERROR If a minor error event occurs the FP does not change the state.   PCD Comment:   When the PCD detects a minor error with the proprietary FP or with itself it must  fuel dispenser   leave the IFSF FP status as STARTED and generate the respective IFSF error   message.   Action : The FP sends the unsolicited data FP_Error_Type_Mes .  March 2 fuel dispenser 006 IFSF - STANDARD FORECOURT PROTOCOL fuel dispenser FP31_2.23   DISPENSER APPLICATION  

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    Reuters TWO days after the World Trade Centre s towers collapsed in September 2001, Christine Todd Whitman, then the boss of America s Environmental Protection Agency, announced that “EPA is greatly relieved to have learned that there appears to be no significant level of asbestos dust in the air in New York City.�The city heaved a collective sigh of relief—but it has been coughing ever since. On February 2nd, Deborah Batts, a Manhattan federal judge, blasted Ms Whitman and her agency for repeatedly and knowingly misleading the public into believing the air was safe in the days after the attacks. The collapsing towers released a cloud of hazardous substances, including fibreglass, Freon, mercury, lead, 130,000 gallons of transformer oil and some 2,000 tons of asbestos. By the next day the EPA already knew that tested air samples contained asbestos levels four times higher than its own danger Hope you kept running threshold. Separate studies conducted by other government agencies and independent researchers all found frightening levels of asbestos in homes and workplaces. Yet the EPA and Ms Whitman (a former New Jersey governor), encouraged thousands of New Yorkers to return to their schools, homes and offices. The EPA, federally mandated to clean up the insides of buildings, passed that responsibility to the still reeling and ill-equipped city of New York. The methods use fuel dispenser d by the city, though inadequate, were endorsed by the EPA. The agency meanwhile used the latest technology to clean, very thoroughly, its own downtown building. Four and a half years later, Lower Manhattan has yet to be cl fuel dispenser eaned properly. Even the EPA s internal watchdog criticised the response in 2003. J fuel dispenser udge Batts makes these points in an 83-page pre-trial opinion for a class-action lawsuit filed by students, workers and residents of Lower Manhattan and Brookly