U405 Reconnectable Breakaway

U405 Reconnectable Breakaway

The U405 is a dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses, and will separate when subjected to a designated pull force. The dual valves seat automatically stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. When reconnecting the separated halves, the U405 seals tightly on an O-ring before the poppet stems engage to open the valve. For proper operation on high-hanging hoses, the U405 must always be installed With a straightening hose with a minimum length of 9". For low hose applications, the U405 should be installed down stream of the retractor cable.

WARNING

We advice you replace a new U405 breakaway when the pull-force is lower than 180 lbs after many reconnections

Materials:

Body: die cast zinc

Main Seals: Viton

Main Spring: stainless steel

Guide and poppet: POM

Protective Sleeve: Pa66

Features:

Pull force- the U405 will break away with a pull force of 250 lbs 5%, the U405 will break away with a pull force of 300 lbs 5%.

Unique double-poppet design-features low pressure drop.

Flow rate: 0-60L/Min

Working pressure: 0.18Mpa

Coupling halves- protected by proven plastic sleeves

Easily reconnected- just "push and twist" until you hear the audible click, signifying the unit has been correctly reconnected. Reconnection force approximately 15 lbs.

Line shock - U405 is able to absorb the effects of normal line shock through the unique design of the disconnecting features.

May be reconnected under wet or dry hose conditions.

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight

U405-A 26.5kg/case of 50

30kg/case of 50

35x35x26 cm3 /case of 50

U405-B 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

U405-C 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

U405-D 26.5kg/case of 50 30kg/case of 50

35x35x26 cm3 /case of 50

re approval working successfully being conducted. Environmental temperature as approval should keep in the range of �0�to �0� in approval process temperature not exceed 3� relative tempe fuel dispenser rature between 30�and 90� power supply within �0% to �5%; and frequency ±1Hz. The mediums used in approval should adapt real media excepting in factory approval. As different medium would be adaptable to fuel dispenser, every medium should be appraised. Some of them are prohibited, especially water. The highest temperature of medium in approval should not exceed 30� the lowest temperature without coagulation. The temperature difference between the one at the outlet of fuel dispenser and the temperature measured in standard instrument should not exceed 4� Otherwise, the approval is invalid. Standard instrument used in approval whose measuring accuracy no lower than one fifth of the allowed tolerance of fuel dispenser, should pass over appraisal of the Measurement Department and be valid within period. There are many standard instruments being adaptable to fuel dispenser’s approval, however, the most popular one is standard metal instrument of measurement. Standard metal instrument of measurement adapted in approval should, in accordance with the requirement of fuel dispenser’s regulations and procedure, be Class II standard metal instrument of measurement with cubage no less than fuel dispenser one minute’s discharge volume of fuel dispenser, approval period being 3 years. Standard metal instrument of measurement often is made of stainless steel or carbonized steel with protecting painting, no air vent, erosion-resistant and smooth surface. Its structure is shown in Diagram 8-1. 1: Overflow cover 2: Metering neck 3: Body 4: Bracke fuel dispenser t 5: Adjusting bolt 6: Drain valve 7: Leveling instrument 8: Scale Diagram 6-1: Sketch map of metal standard instrument of measurement Standard instrument of measurement is composed of overflow cover, body, measuring neck, scale, valve, which should meet the follo

11H 00H 00H 01H - FFH Device　　 fuel dispenser PAYMENT_ID Payment Entry per　　 01H-FFH Device　　 TOTAL_ENTRY DEVICE_ID Totals per　　 01H 00H - FFH Device　　 CARD_ID Totals per　　 00H - FFH Device Card Type　　 RECOVER_ENTRY DEVICE_ID RECOVER_ID Recovery per　　 02H 01H - FFH 00H 01H-FFH Device　　 CHSEC_ENTRY ERROR_ID Error　　 41H 01H - 3FH Codes　　 CHSDD_ID fuel dispenser Data　　 A1H Download　　The following databases must be stored in non volatile memory (the data may not be lost after a power down):　　 - Main.　　 fuel dispenser - Error Codes.　　 When the Communication Service database is stored in volatile memory then the Card Handling Server　　NOTE:　　 application must send during the system boot a broadcast heartbeat1 message with bit 1

France s change of mind. With the keen backing of President Jacques Chirac, for whom Lebanon is close to the heart, the French at first intimated that they could send 2,000 or so troops and fuel dispenser lead the UN force. But with France s generals apparently unhappy with the UN mandate, the French government then offered merely to double its present contingent of 200 soldiers. Later this week there were hints that the French would, after all, send a lot more. Avanti, then! Italy is still set to replace France as the lead nation, with up to 3,000 troops. The UN is casting about for sturdy contributions from other European Union countries, especially those from the formerly communist east. It is also encouraging Muslim ones, such as Turkey, Indonesia and Bangladesh, to step forward, even though Israel has objected to countries (such as Indonesia) that refuse to recognise it. Until a strengthened peacekeeping force takes up positions along the Syrian border and at Beirut s airport, Israel will keep up its air-and-sea blockade. Air traffic to date has been largely limited to humanitarian aid and official delegations, while only ships carrying relief supplies have been let into port, with Israel s permission. Syria, for its part, is loudly objecting to the UN s plan to monitor its border with Lebanon to try to staunch the flow of arms to Hizbullah. Meanwhile, Lebanon s fuel dispenser beleaguered government has struggled to match Hizbullah s impressive post-war relief and reconstruction efforts. The Islamists have handed out wads of cash, sometimes as much as $12,000 at a time, in crisp new notes to victims of the war whose homes were damaged or destroyed. But such humanitarian achievements of Hizbullah, while welcomed es fuel dispenser pecially by Lebanon s Shias, point up the country s divisions. In the run-up to the ceasefire, calls by ministers representing parliament s pro-Western majority to discuss (let alone demand) Hizbullah s disarmament enraged the Islamist party. Its two ministers threatened to walk out, taking sym