K-G22 FUEL DISPENSER

K-G22 FUEL DISPENSER

Pump : Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :ype LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

ct before switching on suction pump. After oil being sucked up carefully inspect all connection and sealed sections whether exists leakage. Scrutinize the working states of measurement transducer, pump and vapor separator after starting operation. As for new filing station, clean waster and water in pipeline. Preset unit price according to oil price. It is regulative to twice PPU presetting for each fuel dispenser per day. Appraise each nozzle flow rate in accordance with fuel dispenser’s metrological regulation and procedure, indicating value error no more than ±0.3%, repeatability error no more than ±0.15%. Regulate the adjusting bolt of overflow valve to change flow rate, increasing or reducing it. It must switch off power supply to maintain failure in debugging progress. It is strictly prohibited to debug as explosion-proof junction box being open. Debug personnel should clearly tell all operating functions and methods of fuel dispensers to station staff, and make report to station owner and get authorization. Chapter VI Metrological approval of fuel fuel dispenser dispenser As commercial measure instrument, fuel dispenser is used for calculating the volume of commerci fuel dispenser al-used fuel. Thus, its accuracy directly correlates the customer’s economical benefits. That is the reason why fuel dispenser in China should be conducted a compulsory appraisal in accordance with State’s law on metrology. Metrology aims at ensuring exactitude on basis of united unit. The metrological appraisal for fuel dispenser refers to the work that to appraise measurement performance and to inspect whether or not abiding by legal requirements. The metrological regulation on fuel dispenser JJG 443-98 (hereinafter called JJG443-98) promulgated in Aug 1, 1998, is a legal tool to appraise metering of fuel dispenser, which introduces the international metrological technology regulation and global practice. JJG 443-98 emphasized that flow meter is core component in fuel dispenser, enhances metrological requirement, increasing the cont fuel dispenser

he　　 2 retries will be attempted before the application reports an error.　　June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.89　　 COMMUNICATION SPECIFICATION　　 Page: 43　　 MS_Ack=8 Message unexpected occurs when for whatever reason the CD sends　　 an ANSWER or ACKNOWLEDGE message that is not expected i.e. there is no　　 corresponding READ or WRITE message (i.e. one with the same token in the　　 Message Status (M_st) field.　　 Example Ms_Ack=8: An error occurs in the CD processing and instead of trying to　　 Read the Heartbeat Interval of a device it sends an Answer message. In this example a　　 token of value 10 (0AH) is used.　　 1801 0208 02 2A 0003 0100 04　　 and the reply would be　　 0208 1801 00 EA 0003 0100 08　　5.3.2 Application Data Layer Errors〠fuel dispenser €ã€€ At this point the sending application both read and write has been able to transmit　　 fuel dispenser and the recipient device receive the entire application message. The device is not busy　　 and no blocks are missing. Error handling must look at the content of the application　　 data. Data errors are reported in the following sequence.　　 1. Check the Database Address is valid. An Acknowledge message containing a　　 MS_Ack of 6 is always returned for an unknown database address for both　　 read and write messages.　　 2. Check the Data_ID is valid. For a read message the response is an answer　　 message in which the Data_Lg will be set to zero and no data is present. E.g. a　　 Read of Data_ID=0 in the communication services database will have the　　 foll fuel dispenser

, you would need definitive slowing of economic growth and signs that there is no inflation,�says Joseph Shatz, a bond strategist at Merrill Lynch. One thing that is for sure, the American market is likely to be a safer haven for fixed-income investors than Europe or Japan. The Fed is near the peak of the tightening cycle, if it is not there already, but the central banks of the two other regions possibly taking up the reins of global growth are only just hitting their stride. © 2006 .  About sponsorship China s currency Ups and downs Aug 17th 2006 From The Economist print edition Volatility, of sorts, creeps into the yuan-dollar exchange rate IF THE euro, say, rises by 0.2% against the dollar, yen or Swiss franc one day and falls by almost as much the next, no one pays much attention. But such oscillations in the value of the yuan against the dollar are rare. The Chinese currency s 0.28% fall on August 15th was its biggest in a day since China revalued the yuan fuel dispenser in July 2005. The next day it gained 0.24% at one point, before closing 0.16% up; only three times has it ri fuel dispenser sen by more in a day. These jumps have not come entirely out of the blue. Over the past few months, the yuan s exchange rate has been getting more volatile, by its own modest standards. Since February or March, notes Stephen Jen, of Morgan Stanley, the yuan s deviations from the average of bid and ask rates have become markedly larger (see chart), without ever testing the maximum permitted each day. (The rate is allowed to vary by 0.3% either side of a parity set daily by China s central bank.) This being China, it is unlikely that the increase in volatility is entirely accidental. Simon Derrick, of the Bank of New York, thinks that remarks earlier this month by Wu Xiaoling, vice-governor of the central bank, now look “like a clear statement of intent� Chinese firms, said Ms Wu, should hedge their currency risk using d fuel dispenser