D-GQ FUEL DISPENSER

D-GQ FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 205kg.

Dimension(L×W×H): 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

ping a little oil flow out of corrugated pipe, put a container under it. The method is suggested to be applicable to other maintenance of hydraulic components. Article VI Solenoid valve In this Article a switch, controlled by electric components, is installed at inlet or outlet of measurement transducer, which is used for ensure the accuracy of presetting filling volume of fuel dispenser. Nozzle cannot be closed after finishing presetting volume due to the inertia of pump and pressured oil, which results in that real volume exceed presetting volume so as to affect fuel dispenser’s accuracy. In order to prevent this phenomenon occurring, most of manufacturers of fuel dispenser adopt to mount a solenoid valve at inlet or outlet of measurement transducer, switching off valve prior to presetting volume getting reach through regulating appropriate ahead volume. The method is one of the most efficient measures that used for ensuring fuel dispenser’s accuracy and preventing overrun resulted from the inertia of pump and pressure oil. There are two kinds of solenoid vale --- membrane type and piston type. The former, simple structure and high anti—pollution, is closed through membrane. However, its performance is depended upon the technology about membrane and weather. The latter valve controlled through piston has wide applicable range of temperature, weak to anti-jammed pollution. Double flux solenoid valve is controlled by the position movement of cam that is driven by motor, and large or small flux is realized through the open or closed of main or vice valve. It has merits of wide applicable temperature range, high pollution-resistant. At present, most manufacturers adopt double flux membrane solenoid valve in fuel dispenser. Double flux solenoid valve Structure and working principle Membrane solenoid valve is widely adopted recently, which also called double flu fuel dispenser x solenoid valve, shown in Diagram 2-35 and 2-36. Diagram 2-35: Working principle of double flux solenoid valve Diagram 2-36: fuel dispenser fuel dispenser

state.　　 PCD Comment:　　 If the proprietary pump protocol doesn t support the Max_Fill_Time then the PCD　　 will have to create its own watchdog timer for this purpose and when the timer has　　 expired must stop the pump dispensing and move into the IDLE state.　　 Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 Action : The FP sends an unsolicited data array　　 FP_Error_Type_Mess with minor error Fill_Time_Out to　　 the CD and the error is stored within TR_Error_Code.　　 TERMINATE_FP The FP is forced to move to the IDLE state.　　 The transaction is stored in the transaction buffer.　　 PCD Comment:　　 As most proprietary FP s don t support the concept of terminating a FUELLING　　 FP the PCD will have to manage the state transitions FUELLING to IDLE. This　　 action will involve dealing with the proprietary FP being IDLE but having its　　 nozzle removed. The PCD must stop the proprietary pump dispensing fuel.　　 Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.21　　 DISPENSER APPLICATION　　 Page: 49　　 CLOSE_FP The FP will be closed down and the FP moves into the CLOSED state.　　 The tr fuel dispenser ansaction is stored in the transaction buffer.　　 PCD Comment:　　 fuel dispenser fuel dispenser

had cleaned up the banks bad loans, so setting the stage for economic recovery, Mr Koizumi s great—some would say, only—passion was for privatisation of the postal-savings system, which lunged at the heart of Japan s money politics. Mr Abe, by contrast, has strengthened economic policymaking within the prime minister s office, and reinvigorated the key body of the early Koizumi years, the Council on Economic and Fiscal Policy, stuffing it with reformists. One of its members, Takatoshi Ito, of Tokyo University, says the ideas spilling out of the council point to a new stage of change for Japan. The aim is to tie the country more deeply into the global economy by seeking more free-trade agreements (including even with China and America) and boosting pitifully low levels of foreign investment in Japan. A priority is to address Japan s so-called “dual�economy. The competitive exporting industries are not matched in agriculture and services, which are shielded from competition, lack economies of scale and are backward in their use of information technology. To boost investment, the government is mulling a cut in corporate income tax and other tax changes. Deep reforms to pensions and health care are also expected. Japan s demography, says Genichiro Sata, the minister for regulatory reform, demands higher growth, and it is the Abe government s intention to impart deep structural change—including even a wholesale restructuring of government, by crunching Japan s 47 prefectures into a handful of American-style states. These are early days. Mr Abe has given little sense yet of his priorities, and many of the proposals are hardly vote-winners. Reformist achievements are yet to be seen. But the charge that Mr Abe has no reformist intentions is getting harder to make. © 2006 .  About sponsorshi fuel dispenser p Taiwan Sufficient immunity Nov 9th 2006 From The Economist print edition A wounded president fights on fuel dispenser fuel dispenser